土木工程系
电子邮件：duanliping@sjtu.edu.cn
通讯地址：木兰船建大楼A301
2016年12月毕业于WilliamHill中文官方网站结构工程专业，获工学博士学位。随后在WilliamHill中文官方网站力学流动站从事两年半的博士后研究工作。目前任职于交大土木系，博士生导师。
计算结构力学；冷成型钢结构；基于深度学习（如PINN）的薄壁结构数值仿真算法。
欢迎数学、力学基础好，对数值计算和土木工程数字化感兴趣的同学报考硕博士研究生。
中国钢结构协会结构稳定与疲劳分会青年理事；
中国工程建设标准化协会轻型钢结构专业委员会委员；
Thin-Walled Structures, Engineering Structures，Ocean Engineering，ASCE Journal of Structural Engineering等期刊审稿人。
1. 国家自然科学基金委员会，面上项目，52578220，截面非连续冷弯薄壁型钢的精细梁有限元分析方法及其应用研究，2026-01至2029-12，主持；
2. 国家自然科学基金委员会，面上项目，52178147，基于模态理论的截面开孔薄壁梁有限元方法及其应用研究，2022-01至2025-12，主持；
3. WilliamHill中文官方网站新进教师启动计划，AF0100112，基于GBT的几何精确有限元及在钢框架火灾分析中的应用，2020-01至2022-12，主持；
4. 国家自然科学基金委员会，面上项目，基于板件屈曲和屈服线机制耦合分析的冷弯型钢腹板压跛性能与设计方法研究，2024-01至2027-12，在研，主要参与；
5. 上海市科学技术委员会，21DZ1204601，建筑全生命周期数字化管控关键技术研究及示范-课题1，2021-08至2024-07，在研，主要参与；
6. 国家自然科学基金委员会，面上项目，52078292，大型火电厂锅炉钢结构体系协同作用与抗震性能研究，2021-01至2024-12，在研，参与；
7. 工业和信息化部，MC-201620-H01-04，深水半潜式支持平台研发-平台大型生活区人员应急与逃生技术研究-课题4，2017-01至2019-06，已结题，参与；
8. 国家自然科学基金委员会，面上项目，51278296，巨型截面短深钢梁力学性能，2013-01至2016-12，已结题，参与。
Zhang JX, Duan LP*, Wang CJ, Tang ZY, Liu N, Li HT (2025). "DSM design of perforated cold-formed steel lipped channel columns against local, local-distortional and distortional buckling: An experiment-based evaluation," Engineering Structures, 343, Part C:121159. (https://doi.org/10.1016/j.engstruct.2025.121159) (SCI-A档)
Liu JM, Duan LP, Jiang YH, Lin SW, Miao J, Zhao JC (2025). "Bayesian model updating for steel structures with non-ideal boundary conditions using image generation networks and frequency response functions," Mechanical Systems and Signal Processing, 234: 112849. (https://doi.org/10.1016/j.ymssp.2025.112849) (SCI)
Lin SW, Duan LP, Jiang B, Liu JM, Miao J, Zhao JC (2025). "Automated geometric measurement and virtual assembly of steel joints using point clouds," Journal of Constructional Steel Research, 231: 109601. (https://doi.org/10.1016/j.jcsr.2025.109601) (SCI-B档)
Jiang B, Duan LP, Lin SW, Zhu Y, Liu JM, Miao J, Zhao JC (2025). "Mechanical performance and design method of a stiffened T-stub with four-row bolts and oversized holes," Engineering Structures, 329:119842. (https://doi.org/10.1016/j.engstruct.2025.119842) (SCI-A档)
Lin SW, Duan LP, Jiang B, Liu JM, Guo HY, Zhao JC (2024). "Scan vs. BIM: Automated geometry detection and BIM updating of steel framing through laser scanning," Automation in Construction, 170: 105931. (https://doi.org/10.1016/j.autcon.2024.105931) (SCI-A档)
Liu JM, Duan LP, Jiang YH, Zhao LC, Zhao JC (2024). "A rcGAN-based surrogate model for nonlinear seismic response analysis and optimization of steel frames," Engineering Structures, 323, Part B:119199. (https://doi.org/10.1016/j.engstruct.2024.119199) (SCI-A档)
Liu JM, Duan LP, Lin SW, Miao J, Zhao JC (2024). "Semantic web-based CRUD operation and constraint validation for IFC-based information management," Journal of Construction Engineering and Management, 150(10): 04024135-1-16. (SCI)
Lin SW, Duan LP, Liu JM, Xiao Xiao, Miao J, Zhao JC (2024). "Automated geometric reconstruction and cable force inference for cable-net structures using 3D point clouds," Automation in Construction, 165: 105543. (https://doi.org/10.1016/j.autcon.2024.105543) (SCI-A档)
Liu JM, Duan LP, Lin SW, Miao J, Zhao JC (2024). "Concept, Creation, Services and Future Directions of Digital Twins in the Construction Industry: A Systematic Literature Review," Arch Computat Methods Eng. https://doi.org/10.1007/s11831-024-10140-4 (SCI)
Hua Y, Duan LP, Zhao JC (2024). “Performance-based fire protection of clustered individual members within a steel frame structure," Journal of Constructional Steel Research, 218:108691. (https://doi.org/10.1016/j.jcsr.2024.108691) (SCI-B档)
Duan LP, Miao J, Zhao JC (2024). “Extending Generalized Beam Theory to Allow Cross-Section Discontinuities: Application to Stiffened Thin-Walled Members," Thin-Walled Structures, 198: 111682. (https://doi.org/10.1016/j.tws.2024.111682) (SCI-A档)
Duan LP, Miao J, Li HT, Zhao JC (2024). “Extended GBT Formulation for Eigenvalue Buckling Analyses of Thin-Walled Members with Edge-Stiffened Holes," Thin-Walled Structures, 197: 111628. (https://doi.org/10.1016/j.tws.2024.111628) (SCI-A档)
Zhao Q, Zhao XL, Zhang DX, Duan LP (2024). “Effects of exposure in seawater sea-sand concrete pore solution on fatigue performance of carbon FRP bars,” Composites Science and Technology, 247: 110418. (SCI-A档)
Jiang YH, Duan LP, Zhao JC (2023). “Seismic Performance Assessment of a Cable-Damper Stopper Equipped for Coal-Fired Thermal Power Plants: Theoretical and Numerical Analyses," Journal of Earthquake Engineering, In Press. (https://doi.org/10.1080/13632469.2023.2288643) (SCI)
Jiang YH, Duan LP, Yue F, Zhao JC (2023). “Shaking table test of the shock absorbing performance of a new cable‐damper stopper for coal‐fired thermal power plants," The Structural Design of Tall and Special Buildings, In Press. (https://doi.org/10.1002/tal.2083) (SCI)
Zhang JJ, Zhao JC, Song ZS, Duan LP (2023). “Experimental and modeling study on evacuation behaviors considering small groups under different visibility," Physica A: Statistical Mechanics and its Applications, 623(4):128850. (SCI)
Zhang JJ, Zhao JC, Song ZS, Duan LP (2023). “Experimental Study and Numerical Simulation of Evacuation in an Offshore Platform," J. Shanghai Jiao Tong Univ. (Sci.), 2023. (https://doi.org/10.1007/s12204-023-2629-4) (EI)
Jiang YH, Duan LP, Zhao JC (2023). “An iterative method based on a 3-DOF model for optimal seismic design of coal-fired thermal power plant," Journal of Pressure Vessel Technology, 145(3): 034502 (SCI)
Liu C, Duan LP* (2023). “An analytical prediction of the distortional buckling loads for cold-formed channel beams with edge-stiffened rectangular web openings," Buildings, 13(1), 101. (https://doi.org/10.3390/buildings13010101) (SCI)
Duan LP, Zhao JC (2022). “An extended GBT formulation for elastoplastic analyses of perforated thin-walled members,” Thin-Walled Structures,181C:110143. (SCI-A档)
Ruan SP, Zhao JC, Song ZS, Duan LP (2022). “Experimental and Numerical Studies of Multi-compartment Spreading Fire in a Full-Scale Steel Framed Building,” Fire Technology, in Press. (https://doi.org/10.1007/s10694-022-01301-7) (SCI)
Duan LP, Zhao JC, Zou JX (2022). “Generalized beam theory-based advanced beam finite elements for linear buckling analyses of perforated thin-walled members,” Computers & Structures, 259: 106683. (SCI-A档)
Ruan SP, Zhao JC, Song ZS, Duan LP (2022). “Experimental investigation on the structural response of a steel framed building subjected to travelling fire,” Journal of Structural Engineering (ASCE), 148(2): 04021269. (SCI-A档)
Duan LP, Zhao JC (2021). “An extended first-order generalized beam theory for perforated thin-walled members,” Thin-Walled Structures, 161: 107492. (SCI-A档)
Duan LP, Zhao JC (2019). “A geometrically exact cross-section deformable thin-walled beam finite element based on generalized beam theory,” Computers & Structures, 218:32-59. (SCI-A档)
Duan LP, Zhao JC (2019). “GBT deformation modes for thin-walled cross-sections with circular rounded corners,” Thin-Walled Structures, 136:64-89. (SCI-A档)
Duan LP, Zhao JC (2018). “A nonlinear explicit dynamic GBT formulation for modeling impact response of thin-walled steel members,” Journal of Southeast University (English Version), 34(2):237-250. (EI)
Duan LP, Zhao JC, Liu S (2016). “A B-splines based nonlinear GBT formulation for elastoplastic analysis of prismatic thin-walled members,” Engineering Structures, 110(1): 325-346. (SCI-A档)
Duan LP, Zhao JC, Liu S, Zhang DX (2016). “A B-splines-based GBT formulation for modeling fire behavior of restrained steel beams,” Journal of Constructional Steel Research, 116:65-78. (SCI-B档)
Duan LP, Zhao JC (2017). “A cross-section deformable beam finite element model for fire simulations of thin-walled steel columns,” Proceedings of the International Conference of Applications of Structural Fire Engineering (ASFE 2017), September 7-8, Manchester, United Kingdom. (DOI: 10.1201/9781315107202-38)
阮诗鹏, 赵金城, 宋振森, 段立平 (2021). “蔓延火灾下钢框架结构抗火性能试验,” 建筑结构学报, 43(09): 103-114. (EI)
刘吉明, 段立平, 林思伟, 缪季, 赵金城 (2024). "语义网赋能建筑信息交付及模型数据模式分析," 土木与环境工程学报(中英文), 46(1): 244-253.
担任研究生课程《结构稳定理论》助课；
主持本科生PRP项目、大创项目。
指导本科生毕业设计。
(1) 刘吉明; 严凯; 段立平; 赵金城; 林思伟; 缪季 ; 基于实景图片与建筑三维模型配准的室内定位系统, 2023-7-20, 中国, 2023108934070 (专利)
(2) 蒋雨衡; 赵金城; 段立平 ; 用于电厂锅炉钢框架结构的含阻尼非线性弹簧限位器, 2023-3-14, 中国, ZL 2022 1 0651951.X (专利)
(3) 林思伟; 李红梅; 赵金城; 段立平; 刘吉明; 缪季 ; 基于倾斜摄影的施工现场地面激光扫描仪扫描规划方法, 2023-3-3, 中国, 2023101960924 (专利)
(4) 刘吉明; 赵金城; 段立平; 林思伟; 缪季; 郭昊宇 ; 基于数字孪生的薄壁钢结构力学试验与仿真方法, 2023-2-6, 中国, 202310067789.1 (专利)
(5) 刘吉明; 赵金城; 段立平; 林思伟; 缪季 ; 一种基于语义Web技术的建筑数字孪生框架及建模方法, 2022-7-5, 中国, 202210782022.2 (专利)
(6) 刘吉明; 赵金城; 段立平; 林思伟; 缪季 ; BIM信息语义化查询与更新软件[简称：SemBIMCURD-SJTU]V1.0, 2023SR0424035, 原始取得, 全部权利, 2023-1-10 (软件著作权)
2021年度黄金枝土木建筑奖研金（一等奖）；
